- Home /
- Boat Hardware /
- Clutches /
- Spinlock XTX Clutch, Suits 8-12mm Lines
Shop Now
- Batteries
- Boat Hardware
- Comfort
-
Electrical
- Battery Switch
- Busbars, Terminals & Insulators
- Cable Management
- Circuit Breakers
- Deck Seals
- Electrical Panels
- Electrolysis Protection
- Engine Instruments
- Fuses & Fuse Blocks
- Heat Shrink
- Horns
- Meters
- Plugs & Sockets
- Single & Multi-Core Cables
- Switches
- Terminals & Crimps
- Tank Senders
- Accessories, Upgrades & Spares
-
Marine Electronics & Raymarine
- Antennas
- Autopilots
- Axiom Range
- Digital Switching
- Electronic Charts
- Element Series
- Fishfinder/Sonar Modules
- Instruments
- Marine AIS Devices
- Marine Cameras
- Mounting Systems
- Networking & Cables
- NMEA Converters & Sensors
- Radar
- Satellite TV
- Thermal Cameras
- Transducers
- VHF Radios
- Accessories, Upgrades & Spares
- Marine Lighting
- Power Generation & Management
- Propulsion & Around The Engine
- Pumps
- Safety Solutions
- Sanitation & Tanks
- Steering Control & Trim
- Tenders & Inflatables
- Vessel Manoeuvring Systems
- Watermakers
- Winches & Cranes
Spinlock XTX Clutch, Suits 8-12mm Lines
Spinlock XTX Rope Clutch with optimised SOFTGRIP braid technology.
Drawing on experience in both mechanical and textile product design the XTX Soft Grip Clutch uses a combination of new materials to offer mid load rope holding in a lightweight, compact device. Using an innovative braided ‘soft grip’ technology to engage and hold a loaded line, the XTX benefits from being very ‘kind’ to the rope cover with a controlled and easy release.
Ultra-lightweight mid-load rope holding. Gentle on rope covers increases the lifecycle of your ropes. Neat, retracting toggle for fingertip control of clutching power. Push button clutch activation with lock-open indicator. Fully enclosed body protects against accidental release. Small footprint and very low profile with no handle rotation space required. Simple, versatile installation, 2 fasteners for deck, bulkhead, rig or tunnel mounting. Remote release capability. Easy set up – no performance tuning required.
NOTE: Correct rope diameter is critical for the correct operation of these clutches. NZ rope manufacturers rope tend to be generous with their diameters compared to European and American manufactured lines that tend to be spot on. NZ manufactured rope generally require going up a size. An example is Fineline 10mm braid generally requires 11mm XTX clutches.
Model | Measured Diameter | MWL | Weight |
XTX08 | 8mm | 800kg (1760 lb) | 360g |
XTX09 | 9mm | 900kg (1980 lb) | 360g |
XTX10 | 10mm | 1000kg (2200 lb) | 365g |
XTX11 | 11mm | 1100kg (2420 lb) | 365g |
XTX12 | 12mm | 1200kg (2640 lb) | 375g |
Related Products
-
Line Ø 8-14mm, Single Clutch, Black, Loads up to 1200kgXCS0814-1BRRP:$535.00 Incl. GST