- Home /
- Marine Electronics & Raymarine /
- NMEA Converters & Sensors /
- Veratron LinkUp Gateway with NFC
Shop Now
- Batteries
- Boat Hardware
- Comfort
-
Electrical
- Battery Switch
- Busbars, Terminals & Insulators
- Cable Management
- Circuit Breakers
- Deck Seals
- Electrical Panels
- Electrolysis Protection
- Engine Instruments
- Fuses & Fuse Blocks
- Heat Shrink
- Horns
- Meters
- Plugs & Sockets
- Single & Multi-Core Cables
- Switches
- Terminals & Crimps
- Tank Senders
- Accessories, Upgrades & Spares
-
Marine Electronics & Raymarine
- Element Hv
- Antennas
- Autopilots
- Axiom Range
- Digital Switching
- Electronic Charts
- Element Series
- Fishfinder/Sonar Modules
- Instruments
- Marine AIS Devices
- Marine Cameras
- Mounting Systems
- Networking & Cables
- NMEA Converters & Sensors
- Radar
- Satellite TV
- Thermal Cameras
- Transducers
- VHF Radios
- Accessories, Upgrades & Spares
- Marine Lighting
- Power Generation & Management
- Propulsion & Around The Engine
- Pumps
- Safety Solutions
- Sanitation & Tanks
- Steering Control & Trim
- Tenders & Inflatables
- Vessel Manoeuvring Systems
- Watermakers
- Winches & Cranes
Veratron LinkUp Gateway with NFC
The Veratron LinkUp gateways bring your analogue sensors to the NMEA 2000 network era. All your boat’s data is now digitally available to be displayed on any NMEA 2000 enabled device.
The Temp and Press variant allows the connection of the combined Engine Oil sensor, which delivers both temperature and pressure with a single component.
The Resistive variant allows the connection of a wide array of sensors such as level sensors, temperature sensors, pressure sensors, and many more.
The Pyrometer variant allows the connection of the exhaust sensor thermocouple (N03-320-264). A 6 meters extension cable is included in the kit.
All NMEA 2000 certified! The standard Micro-C M12 connector perfectly interfaces with the NMEA 2000 network without the need of additional adapters. No dedicated power supply is required, the LinkUp gateway gets its power directly from the NMEA 2000 network. The embedded LED notifies you the status of the device and its configuration at any time, reducing commissioning and troubleshooting time. The configuration of the LinkUp devices has never been so easy. Launch the App and define your settings through the user-friendly interface, then simply hold your mobile device in proximity of the LinkUp to transfer the configuration. Thanks to the embedded passive antenna the configuration can be done powerless.
Operating voltage |
6 – 16.5 V |
Nominal voltage |
12 V (from NMEA 2000® network) |
Power consumption |
≤ 100 mA |
NMEA 2000® LEN |
2 |
Protection class |
IP X7 according to IEC60529 (when connected) |
Operating temperature |
-30°C to 80°C |
Flammability |
UL94-HB |
Measurement range |
100 – 900 °C |
LinkUp sensor cable length |
25 cm |
NMEA 2000® cable length |
25 cm |
LinkUp Sensor-side plug |
TE AMP Superseal 1.5 2 pins - Female |
Extension cable LinkUp-side plug |
TE AMP Superseal 1.5 2 pins - Male |
NMEA 2000® plug |
DeviceNet Micro-C M12 5 pins - Male |
Compliance |
CE, Reach, RoHS, UL94, ISO 8846:1990 |