Jabsco High Pressure Cyclone Centrifugal Pump
The Jabsco High Pressure Cyclone pump is a stainless-steel centrifugal pump with a 3/4" BSP Ports, coupled to a 12 Volt DC Motor. The High Pressure Cyclone is a long-life pump that delivers flows of up to 21 GPM (80 LPM) and pressures up to 17 psi (1.2 bar), making it ideal for general transfer and circulation duties for water and mild chemicals where more restrictions are present. It can be used in conjunction with trigger nozzles. Jabsco circulation pumps are designed for reliability and ease of use. Centrifugal pumps are the correct product for closed-circuit circulation systems, such as live well circulation, washdown, central heating and other flooded suction applications.
The Cyclone can be mounted on any flat surface. The pump must be installed below the lowest fluid level to maintain flooded suction. This pump can be run dry for short periods of time, and it can be run against a closed discharge.
Connections: - ¾”BSP internal threaded ports
Dimensions: - 205mm long, 120mm wide, 122mm high
Fuse Size:
- 12V: 25(amp)
- 24V: 13(amp)
Maximum Current:
12V: 21(amps)
24V: 10.5(amps)
Output: - 80 litres/minute (18 gallons/minute) @ 0.1m head
High output, intermittent rated centrifugal pump
Robust stainless steel body
Can be used with shut-off nozzle
Non-self-priming, requires flooded suction
Maximum recommended total head 12m
Minimum recommended total head 5m
Packaged Dimensions: L:31.00 x H:14.00 x W:16.00cm
