- Home /
- Marine Electronics & Raymarine /
- Transducers /
- Raymarine SS164 Stainless Steel Transducer
Shop Now
- Batteries
- Boat Hardware
- Comfort
-
Electrical
- Battery Switch
- Busbars, Terminals & Insulators
- Cable Management
- Circuit Breakers
- Deck Seals
- Electrical Panels
- Electrolysis Protection
- Engine Instruments
- Fuses & Fuse Blocks
- Heat Shrink
- Horns
- Meters
- Plugs & Sockets
- Single & Multi-Core Cables
- Switches
- Terminals & Crimps
- Tank Senders
- Accessories, Upgrades & Spares
-
Marine Electronics & Raymarine
- Antennas
- Autopilots
- Axiom Range
- Digital Switching
- Electronic Charts
- Element Series
- Fishfinder/Sonar Modules
- Instruments
- Marine AIS Devices
- Marine Cameras
- Mounting Systems
- Networking & Cables
- NMEA Converters & Sensors
- Radar
- Satellite TV
- Thermal Cameras
- Transducers
- VHF Radios
- Accessories, Upgrades & Spares
- Marine Lighting
- Power Generation & Management
- Propulsion & Around The Engine
- Pumps
- Safety Solutions
- Sanitation & Tanks
- Steering Control & Trim
- Tenders & Inflatables
- Vessel Manoeuvring Systems
- Watermakers
- Winches & Cranes
Raymarine SS164 Stainless Steel Transducer
Step up to a 1kW—Without a Fairing! The 1kW, flush-mount, Tilted Element™ transducer is perfect for fast, trailered, vessels that cannot accommodate a high-performance fairing. The flush-mounted, stainless steel housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks. The ceramic arrays are tilted inside the housing providing the perfect vertical beam with maximum energy on what is directly below the boat.
Available in three Tilted Element™ models:
Fixed 20° tilted version for 16° to 24° hull deadrise
Fixed 12° tilted version for 8° to 15° hull deadrise
Fixed 0° tilted version for 0° to 7° hull deadrise
Features
- Depth and fast-response water-temperature sensor
- 1kW power for performance to 1800' (548m)
- 50 kHz with a wide 22° beam
- 200 kHz with a 6° beam
- Engineered for centre-console and trailered boats
- Low-profile protrusion - less than 6.35 mm (0.25") outside your hull
- Stainless steel transducer housing for use on all hull materials
- Recommended boat size: up to 11 m (35')
- Interfaces to any compatible 600W or 1KW Sounder with DSM/CP370 connector
- Also available in stainless steel (SS164) for use on all hull materials
Style: Thru-Hull
Deadrise angle: up to 24°
Cable Length: 30' (9m)
Boat Size: Up to 11 m (35')
Monitors: Depth/temperature
Material: Stainless steel housing, Urethane acoustic window
Compatible Hull Material: Fibreglass, Wood & metal
Transmit Power: 1kW
Frequency: 50/200kHz
Depth:
- 50kHz: 1,800'
- 200kHz: 800'
Beam width:
- 50kHz: 22°
- 200kHz: 6°
NOTE: Also available in a bronze housing (B164) for use on.
* For Stainless Steel models, an isolation ring is required.
See Owner's Guide for proper installation on Manual & Resources.
Related Products
-
CP370 Clearpulse Sonar ModuleE70297RRP:$1,864.10 Incl. GST
-
50/200 kHz , Depth/TemperatureE66084RRP:$1,860.00 Incl. GST
-
Axiom RV to 7-pin CP370 Transducer AdapterA80489RRP:$152.04 Incl. GST