Victron Small BMS
The Victron Small BMS is designed for use with Victron Lithium Iron Phosphate batteries only. Its function is to manage the battery bank and prevent overcharging or over discharging. For use with Victron Smart Lithium Ion Batteries only.
Features: Load disconnect output, charge disconnect output. System on/off input. LED status indicator. Pre-alarm output gives a minimum of 30 seconds warning of a disconnect.
| Small BMS 12/200 | |
| Normal operating input voltage range: | 8-70VDC |
| Current draw normal operation: | 2.2 mA (excluding Load output and Charger output current) |
| Current draw, low cell voltage: | 1.2mA |
| Current draw, remote off: | 1.2mA |
| Load output: | Normally high (Vbat – 0.1V) Source current limit: 1A (not short circuit protected) Sink current: 0A (output free floating) |
| Charger output: | Normally high (Vbat –0.6V) Source current limit: 10mA (short circuit protected) Sink current: 0A (output free floating) |
| Pre-alarm: | Normally free floating In case of alarm: output voltage Vbat -0.1V Maximum output current: 1A (not short circuit protected) |
| System on/off: Remote L and Remote H: |
Use modes of the system on-off: a. ON when the L and H terminal are interconnected (switch or relay contact) b. ON when the L terminal is pulled to battery minus (V< 3.5V) c. ON when the H terminal is high (2.9V < VH < Vbat) d. OFF in all other conditions |
| Operating temperature range: | -20 to +50°C 0 - 120°F |
| Humidity: | Max. 95% (non-condensing) |
| Protection, electronics: | IP20 |
Related Products
-
Connector Pair MC4, 1 Male / 1 FemaleSCA520300000RRP:$19.00 Incl. GST
-
12.8V 160AH Smart BatteryBAT512116610RRP:$2,022.29 Incl. GST
-
